|
Eiger Machinery, Inc.
888 East Belvidere Rd.
Grayslake, IL 60030 USA
Tel: 847-548-0044
Fax: 847-548-0099
E-mail:
sales@eigerus.com
|
|
Maxi Mills
Self Pumping Laboratory Bead Mill
MAXI
MILLS ARE USED FOR WET MILLING, FINE GRINDING AND DISPERSING
OF LARGER LABORATORY SAMPLES
Operation is similar to the Mini series mills.
- Single pass
or high flow re-circulation
- Self contained milling system.
- Self pumping, includes a two stage arrangement.
- In line mixing prior to milling improves efficiency.
- 3 & 5
horsepower.
- General purpose & explosion proof motors & controls.
- Optional intrinsically
safe controls available.
- 2 to 20 liters
feed funnels.
- Optional funnel mixers.
- Stainless
steel construction.
- Polyurethane and ceramic available.
|
 |
General
Operation - Products to be ground
are premixed, poured into the feed funnel where they are pumped
into the milling chamber and an agitated bed of grinding beads.
These beads can be glass, ceramic or steel and range in size
from 0.3mm to 3 mm in diameter. The agitator rotational speed
is electronically controlled. Product quality is determined by
adjusting the chamber residence time using the metering discharge
valve located at the chamber end and by adjusting tip speed and
product formulation. The chamber and seal housing are water jacketed
for efficient cooling. |
|
|
|
